• About TNC Series

TNC connector is a threaded version of the BNC connector. The connector are miniature, weatherproof units which have constant 50 ohm impedance and It has better performance than the BNC connector at microwave frequencies, operate in the 0-11 GHz frequency range. These features make TNC connectors an ideal choice for use in cellular mobile communications, and test and instrument equipment. TNC connectors are also widely used in airframe, aerospace and radar applications where extreme vibration is a factor.

Voltage Rating:≧500 V rms.(depending on cable)
Insulator Resistance:≧5 GΩ
Dielectric Withstanding Voltage: ≧1500 V rms
Contact Resistance:Center Contact ≦1.5 mΩ、Outer Contact ≦0.4 mΩ

Mating: 7/16-28 UNEF Screw-on Coupling
Force to Engage and Disengage:
Torque: ≦2 in. lbs.
Coupling Proof Torque: ≦15 in. lbs.
Coupling Mechanism Retention Rorce:≧100 lbs.

Temperature Range: -65°C to 165°C
Corrosion (Salt Spray): MIL-STD-202, Method 101, Cond. C
Shock: MIL-STD-202, Method 213, Cond. I
Vibration: MIL-STD-202, Method 204, Cond. B
Thermal Shock: MIL-STD-202, Method 107, Cond. B
Except Test High Temperature Shall Be +85°C.

Parts Name Material Plating
Body Brass Nickel or Gold
Inner Contact Male: Brass
Female:Brass,Phosphor Bronze or Beryllium Copper
Nickel or Gold
Insulator PTFE or Delrin None
Gasket Silicone Rubber, Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

  • Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
  • Accommodates a wide range of popular coaxial cables.
  • Screw-on coupling mating.
  • Available in crimp terminations to provide for low cost installation.
  • Interface according to IEC 169-17, MIL-STD-348B
  • Cellular Mobile Phones
  • Test and Measurement
  • Instrumentation
  • Aircraft and Missile
  • Radar
  • Computer Networks/LANs
  • Base Stations
  • Microwave Components (Filters, Diplexors)
View All Products