- About N Series
N-type connectors are designed to satisfy the need for a durable, weatherproof, medium-size RF connector with performance through 11 GHz. Our N-Type connectors feature threaded coupling mechanisms and are fully interchangeable with N-type connectors made to the MIL-PRF-39012 specification. These connectors are used in all systems where excellent RF and mechanical performance is critical. N-type connectors are used in aerospace, broadcast audio and video applications as well as many microwave components such as filters, couplers, dividers, amplifiers and attenuators to name a few.
Impedance：50Ω / 75Ω
Frequency Range：0 to 11GHz / 0 to 1.5GHz
Voltage Rating：≥1000 V rms (depending on cable)
Insulation Resistance：≥5 GΩ
Dielectric Withstanding Voltage：2500 V rms
Contact Resistance：Center Contact ≤1 mΩ、Outer Contact ≤1 mΩ
VSWR：≤1.3 (Straight)≤ 1.35 (Right Angle)
Mating： 5/8-24 UNEF threaded coupling
Connector Durability： ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque：6.0 lbs ~ 10.0 lbs
Coupling Nut Retention Force：≥101.3 lbs
Cable Retention Force：≥ 12.1 lbs (for RG316)、≥ 28.7 lbs (for RG58)、≥ 94.5 lbs (for RG213)
Temperature Range：-55°C to 155°C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. B
Thermal Shock：MIL-STD-202, Method 107, Cond. B
Mechanical：MIL-STD-202, Method 213, Cond. I
Vibration：MIL-STD-202, Method 204, Cond. B
|Inner Contact||Male: Brass
Phosphor Bronze or Beryllium Copper
|Crimp Ferrule||Annealed Copper||Same as Body|
Note: Other Material/Finish is Available on Request.
- Accommodates a wide range of popular coaxial cables.
- Screw-on coupling mating.
- Available in crimp terminations to provide for low cost installation.
- Interface according to IEC 169-16, CECC 22210, MIL-STD-348B
- Base Stations
- Microwave Components (Power Splitters & Combiners, Filters, Diplexors)
- Test & Measurement