- About SMB Series
SMB connectors are semi – precision, subminiature devices that provide repeatable electrical performance to 4 GHz. The SMB family of connectors provide a means of quick-connect and disconnect through a snap-on type coupling.
Its smaller physical size and snap-on coupling make the SMB an ideal general purpose connector where packaging density, ease of mating / unmating and economy are prerequisites. Crimp, clamp and receptacle types are available in right angle , printed circuit board and straight body styles.
Typical applications for SMB connectors are telecommunications, test equipment, instrumentation and GPS .
Frequency Range:0 to 4 GHz
Voltage Rating:≥250 V rms (depending on cable)
Insulation Resistance:≥1 GΩ
Dielectric Withstanding Voltage:750 V rms
Contact Resistance:Center Contact ≤5 mΩ、Outer Contact ≤2.5 mΩ
VSWR:≤1.3 (Straight)、≤1.45 (Right Angle)
Mating: Snap-on Coupling
Connector Durability: ≥500 Cycles (for beryllium copper female contact only)
Engagement Force:≤14.2 lbs
Disengagement Force:1.8 lbs~14.2 lbs
Cable Retention Force:≥ 7.3 lbs (for RG178)、≥ 12.1 lbs (for RG316)
Temperature Range:-65° C to 165° C
Corrosion (Salt Spray):MIL-STD-202, Method 101, Cond. B
Thermal Shock:MIL-STD-202, Method 107, Cond. B
Mechanical:MIL-STD-202, Method 213, Cond. B
Vibration:MIL-STD-202, Method 204, Cond. D
Parts Name | Material | Plating |
Body | Brass | Nickel or Gold |
Inner Contact | Male: Brass Female: Beryllium Copper Phosphor Bronze |
Gold |
Insulator | PTFE | None |
Gasket | Silicone Rubber | None |
Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
- Low cost combined with high quality.
- Broadband performance with low reflection DC to 4 GHz.
- Quick connect/disconnect snap on mating.
- 50 and 75 ohm impedance.
- Various plating options.
- Interface according to IEC 169-10, MIL-STD-348B
- Telecommunications
- Test and Measurement
- Instrumentation
- Wireless
- Process Controls
- PC / LAN
- Base Stations
- Microwave Components
- Raido Boards
- Video Systems