- About MCX Series
MCX micro-miniature connectors provide repeatable performance from DC to 6 GHz. The designs of these devices have taken into consideration the need for size reduction, low weight, durability and reliable performance. The MCX devices enable a 30% space reduction over similar SMB/SMC types. The MCX is available for affixement to industry standard cable and as a printed circuit board device. The snap-on connection feature between devices offers the user ease of assembly in dense packaging layouts. Applications for the MCX are those where size, weight, performance and ease of assembly are the driving considerations to the final design decision. Typically, these include GPS, wireless communications (WLAN and mobile) and automotive.
Impedance：50Ω / 75Ω
Frequency Range：0 to 6 GHz
Voltage Rating：≥335 V rms (depending on cable)
Insulation Resistance：≥1 GΩ
Dielectric Withstanding Voltage：750 V rms
Contact Resistance：Center Contact ≤5 mΩ、Outer Contact≤2.5 mΩ
Mating： Snap-on Coupling
Connector Durability： ≥500 Cycles (for beryllium copper female contact only)
Engagement Force：≤3.4 lbs
Disengagement Force：1.4 lbs ~ 3.4 lbs
Cable Retention Force：≥7.3 lbs (for RG178)、≥12.1 lbs (for RG316)
Temperature Range：-55° C to 155° C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. B
Thermal Shock：MIL-STD-202, Method 107, Cond. F
Mechanical：MIL-STD-202, Method 213, Cond. B
Vibration：MIL-STD-202, Method 204, Cond. C
|Body||Brass||Gold or Nickel|
|Outer Contact||Beryllium Copper||Gold or Nickel|
|Inner Contact||Male : BrassFemale :Phosphor Bronze
|Crimp Ferrule||Annealed Copper||Same as Body|
Note: Other Material/Finish is Available on Request.
- Low cost combined with high quality.
- Broadband performance with low reflecttion DC to 6 GHz.
- Quick connect/disconnect snap-on mating.
- 50 ohm impedance.
- Interface according to IEC 169-36, CECC 22220
- Process Controls