• About 6G-SDI 1.0/2.3 Series

Introduction

These connectors have been specially developed for application in communication engineering. The maximum operating frequency of the 50 ohm version is approximately 4 GHz. Plug style are available for screw-on, snap-on (two versions: simple snap-on and an automatic latching quick-lock), and slide-on coupling. Female styles are identical for all versions.

Type A (Screw-on coupling)
The connector is fitted with a coupling nut with which the plug and socket sections can be screwed by hand in accessible locations.

Type C (Slide-on coupling with centering sleeve)
The movable (floating) inserted male connector used in a panel plate is provided with a conical insertion guide to facilitate its connection to the fixed part (female connector). The interconnection is a slide fit.

Type F (Quick-lock automatic latching coupling)
Plugs possess a latching sleeve fitted with an additional spring device which snaps into a corresponding slot of the jack when it plugged together. Pulling the latching sleeve of the plug disengages the connection. Rapid and simple connection and disconnection is possible.

Electricala

Impedance:75Ω
Frequency Range:0 to 6 GHz
Voltage Rating:250 V rms (depending on cable)
Insulator Resistance:≥1 GΩ
Dielectric Withstanding Voltage:750 V rms
Contact Resistance:Center Contact ≤10 mΩ、Outer Contact ≤3 mΩ

Mechanical

Mating: Screw-on / Slide-on / Quick-lock
Engagement Force: ≤2.3 lbs
Disengagement Force: ≤2.3 lbs

Environmental

Temperature Range: -45°C to 85°C
Corrosion (Salt Spray): MIL-STD-202, Method 101, Cond. C
Thermal Shock: MIL-STD-202, Method 107, Cond. B
Mechanical: MIL-STD-202, Method 213, Cond. B
Vibration: MIL-STD-202, Method 204, Cond. A

Material
Parts Name Material Plating
Body Brass Gold or Nickel
Outer Contact Beryllium Copper Gold or Nickel
Inner Contact

Male : Brass

Female : Phosphor Bronze

Beryllium Copper

Gold
Insulator PTFE None
Gasket Silicone Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Features
  • Meets DIN 41626, DIN 47297 and NFC 93-571 international specifications.
  • Plugs and bulkhead jacks available in pull types ensuring high reliability and a lower installed cost.
  • Mates with DIN 41612 Two-Piece connectors.
  • Interface according to IEC 169-29, cecc22230, DIN47297
Applications
  • Telecommunications
  • Switching equipment and routers
  • Datacom
View All Products