- About 1.0/2.3 Series
These connectors have been specially developed for application in communication engineering. The maximum operating frequency of the 50 ohm version is approximately 4 GHz. Plug style are available for screw-on, snap-on (two versions: simple snap-on and an automatic latching quick-lock), and slide-on coupling. Female styles are identical for all versions.
Type A (Screw-on coupling)
The connector is fitted with a coupling nut with which the plug and socket sections can be screwed by hand in accessible locations.
Type C (Slide-on coupling with centering sleeve)
The movable (floating) inserted male connector used in a panel plate is provided with a conical insertion guide to facilitate its connection to the fixed part (female connector). The interconnection is a slide fit.
Type F (Quick-lock automatic latching coupling)
Plugs possess a latching sleeve fitted with an additional spring device which snaps into a corresponding slot of the jack when it plugged together. Pulling the latching sleeve of the plug disengages the connection. Rapid and simple connection and disconnection is possible.
Impedance：50Ω / 75Ω
Frequency Range：0 to 10 GHz / 0 to 2 GHz
Voltage Rating：250 V rms (depending on cable)
Insulation Resistance：≥1 GΩ
Dielectric Withstanding Voltage：750 V rms
Contact Resistance：Center Contact ≤10 mΩ、Outer Contact ≤3 mΩ
Mating：Screw-on / Slide-on / Quick-lock
Engagement Force：≤2.3 lbs
Disengagement Force：≤2.3 lbs
Temperature Range：-40° C to 85° C
Corrosion (Salt Spray)：MIL-STD-202, Method 101, Cond. C
Thermal Shock：MIL-STD-202, Method 107, Cond. B
Mechanical：MIL-STD-202, Method 213, Cond. B
Vibration：MIL-STD-202, Method 204, Cond. A
|Body||Brass||Nickel / Gold|
|Outer Contact||Phosphor Bronze / Beryllium Copper||Gold|
|Inner Contact||Brass / Phosphor Bronze / Beryllium Copper (Socket Only)||Gold|
|Ferrule||Annealed Copper||Same as Body|
Note: Other Material/Finish is Available on Request.
- Meets DIN 41626, DIN 47297 and NFC 93-571 international specifications.
- Plugs and bulkhead jacks available in pull types ensuring high reliability and a lower installed cost.
- Mates with DIN 41612 Two-Piece connectors.
- Interface according to IEC 169-29, cecc22230, DIN47297
- Switching equipment and router