Product
RTP03
RP TNC R/A Plug, Crimp Type
for RG174, 188, 316, LMR100, B7805A, URM95 Cable
| Polarity | Reverse Polarity (RP) |
|---|
TNC connector is a threaded version of the BNC connector. The connector are miniature, weatherproof units which have constant 50 ohm impedance and It has better performance than the BNC connector at microwave frequencies, operate in the 0-11 GHz frequency range. These features make TNC connectors an ideal choice for use in cellular mobile communications, and test and instrument equipment. TNC connectors are also widely used in airframe, aerospace and radar applications where extreme vibration is a factor.

Impedance:50Ω
Voltage Rating:≧500 V rms.(depending on cable)
Insulator Resistance:≧5 GΩ
Dielectric Withstanding Voltage: ≧1500 V rms
Contact Resistance:Center Contact ≦1.5 mΩ、Outer Contact ≦0.4 mΩ
Mating: 7/16-28 UNEF Screw-on Coupling
Force to Engage and Disengage:
Torque: ≦2 in. lbs.
Coupling Proof Torque: ≦15 in. lbs.
Coupling Mechanism Retention Rorce:≧100 lbs.
Temperature Range: -65°C to 165°C
Corrosion (Salt Spray): MIL-STD-202, Method 101, Cond. C
Shock: MIL-STD-202, Method 213, Cond. I
Vibration: MIL-STD-202, Method 204, Cond. B
Thermal Shock: MIL-STD-202, Method 107, Cond. B
Except Test High Temperature Shall Be +85°C.
| Parts Name | Material | Plating |
| Body | Brass | Nickel or Gold |
| Inner Contact | Male: Brass Female:Brass,Phosphor Bronze or Beryllium Copper | Nickel or Gold |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber, Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
- Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
- Accommodates a wide range of popular coaxial cables.
- Screw-on coupling mating.
- Available in crimp terminations to provide for low cost installation.
- Interface according to IEC 169-17, MIL-STD-348B
- Cellular Mobile Phones
- Test and Measurement
- Instrumentation
- Aircraft and Missile
- Radar
- Computer Networks/LANs
- Base Stations
- Microwave Components (Filters, Diplexors)
Reverse Polarity non-standard interface connectors are designed for spread spectrum wireless applications where Part 15. 203 of U.S. FCC regulations are applicable. The reverse polarity design prevents damage and will not mate with standard interface devices if accidentally connected. SMA, BNC and TNC devices are readily available. Standard cable affixement sizes are available with special or custom design inquiries accepted.

Impedance:50Ω (SMA)、50Ω / 75Ω (BNC、TNC)
Frequency Range:0 to 18 GHz (SMA)、0 to 4 GHz / 0 to 1 GHz (BNC、TNC)
Voltage Rating:≥500 V rms (depending on cable)
Insulation Resistance:≥5 GΩ
Dielectric Withstanding Voltage:1000 V rms (SMA)、1500 V rms (BNC、TNC)
Contact Resistance:Center Contact ≤3 mΩ (SMA)、1.5 mΩ (BNC、TNC) / Outer Contact ≤2.5 mΩ (SMA)、1 mΩ (BNC、TNC)
VSWR:≤1.3 (Straight)、≤1.35 (Right Angle)
Mating:1/4-36 UNS Screw-on Coupling (SMA)、Bayonet Coupling (BNC)、7/16-28 UNEF Screw-on Coupling (TNC)
Connector Durability:≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque:7.1 lbs ~ 9.7 lbs (SMA)、0.6 lbs ~ 2.5 lbs (BNC)、4.1 ~ 6.1 lbs (TNC)
Coupling Nut Retention Force:≥101.2 lbs
Cable Retention Force:≥ 12.1 lbs (for RG316)、≥ 28.7 lbs (for RG58)、≥ 38.3 lbs (for RG59)
Temperature Range:-65° C to 165° C
Corrosion (Salt Spray):MIL-STD-202, Method 101, Cond. B
Thermal Shock:MIL-STD-202, Method 107, Cond. B
Mechanical:MIL-STD-202, Method 213, Cond. I (SMA) / MIL-STD-202, Method 213, Cond. G (BNC、TNC)
Vibration:MIL-STD-202, Method 204, Cond. D (SMA) / MIL-STD-202, Method 204, Cond. B (BNC、TNC)
| Parts Name | Material | Plating |
| Body | Brass | Gold or Nickel |
| Inner Contact | Male: Brass Female: Beryllium Copper, Phosphor Bronze, Brass | Gold or Nickel |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber or Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
- These connectors may also be used in applications where keying is a necessity. The RP BNCs meet the same high quality requirements as S-Conn’s standard BNCs. They offer excellent performance DC~ 4GHz.
- Spread Spectrum Wireless Devices





