Product
RSP01(2)
RP SMA S/T Plug, Crimp Type
Cable : RG174, 188, 316, B7805A, URM95, LMR100 and more…..
| Polarity | Reverse Polarity (RP) |
|---|
SMA connectors are semi – precision, subminiature devices that provide reliable electrical performance from DC to 12.4 GHz with flexible cable. Semi – rigid cabling extends the frequency range of the device to 18 GHz. These devices offer broadband performance with low reflection and constant 50 ohm impedance. These properties, along with minimum attenuation and low VSWR have made the SMA extremely popular in the microwave community. The SMA design has been broadened to accommodate many interconnect requirements and is available in pressure crimp, clamp and solder terminal attachments. SMA design parameters have incorporated the considerations of balancing cost, size, weight and performance to yield the best value in your microwave system. Among typical applications are components such as dividers, mixers, amplifiers, trimmers and attenuators. SMA connectors are also used to provide interconnections from printed circuit board stripless to coaxial cable.

Impedance:50Ω
Voltage Rating:≥500 V rms (depending on cable)
Insulation Resistance:≥5 GΩ
Dielectric Withstanding Voltage:≥1000 V rms
Contact Resistance:Center Contact ≤3 mΩ、Outer Contact ≤2 mΩ
Mating: 1/4-36 UNS Screw-on Coupling
Force to Engage and Disengage:
Torque: ≦2 in. lbs.
Coupling Proof Torque:≧15 in. lbs.
Coupling Mechanism Retention Rorce:≧60.7 lbs
Temperature Range:-65° C to 165° C
Corrosion (Salt Spray):MIL-STD-202, Method 101, Cond. B
Shock :MIL-STD-202, Method 213, Cond. I
Vibration (HF):MIL-STD-202, Method 204, Cond. D
Thermal Shock :MIL-STD-202, Method 107, Cond. B
Except Test High Temperature Shall Be +85°C.
| Parts Name | Material | Plating |
| Shell | Brass | Nickel or Gold |
| Body | Brass | Nickel or Gold |
| Insulator | PTFE | None |
| Inner Contact | Brass | Gold |
| Braid Clamp | Brass | Nickel or Gold |
| O-Ring | Si-Rubber | Red |
| Washer | Brass | Nickel or Gold |
| Clamp Nut | Brass | Nickel or Gold |
Note: Other Material/Finish is Available on Request.
- Commercial Grade (Brass SMA) available.
- Various cable groups including double shielded RG316.
- Built in accordance with MIL – PRF – 39012F and CECC 22110 / 1111.
- Gold plating or stainless steel passivated finish available.
- Interface according to IEC 169-15, MIL-STD-348B
- Civil & Military Telecommunication
- Instrumentation
- Wireless
- Process Control
- PC/LAN
- Microwave Components(power splitters and combiners, filters, amplifiers)
Reverse Polarity non-standard interface connectors are designed for spread spectrum wireless applications where Part 15. 203 of U.S. FCC regulations are applicable. The reverse polarity design prevents damage and will not mate with standard interface devices if accidentally connected. SMA, BNC and TNC devices are readily available. Standard cable affixement sizes are available with special or custom design inquiries accepted.

Impedance:50Ω (SMA)、50Ω / 75Ω (BNC、TNC)
Frequency Range:0 to 18 GHz (SMA)、0 to 4 GHz / 0 to 1 GHz (BNC、TNC)
Voltage Rating:≥500 V rms (depending on cable)
Insulation Resistance:≥5 GΩ
Dielectric Withstanding Voltage:1000 V rms (SMA)、1500 V rms (BNC、TNC)
Contact Resistance:Center Contact ≤3 mΩ (SMA)、1.5 mΩ (BNC、TNC) / Outer Contact ≤2.5 mΩ (SMA)、1 mΩ (BNC、TNC)
VSWR:≤1.3 (Straight)、≤1.35 (Right Angle)
Mating:1/4-36 UNS Screw-on Coupling (SMA)、Bayonet Coupling (BNC)、7/16-28 UNEF Screw-on Coupling (TNC)
Connector Durability:≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque:7.1 lbs ~ 9.7 lbs (SMA)、0.6 lbs ~ 2.5 lbs (BNC)、4.1 ~ 6.1 lbs (TNC)
Coupling Nut Retention Force:≥101.2 lbs
Cable Retention Force:≥ 12.1 lbs (for RG316)、≥ 28.7 lbs (for RG58)、≥ 38.3 lbs (for RG59)
Temperature Range:-65° C to 165° C
Corrosion (Salt Spray):MIL-STD-202, Method 101, Cond. B
Thermal Shock:MIL-STD-202, Method 107, Cond. B
Mechanical:MIL-STD-202, Method 213, Cond. I (SMA) / MIL-STD-202, Method 213, Cond. G (BNC、TNC)
Vibration:MIL-STD-202, Method 204, Cond. D (SMA) / MIL-STD-202, Method 204, Cond. B (BNC、TNC)
| Parts Name | Material | Plating |
| Body | Brass | Gold or Nickel |
| Inner Contact | Male: Brass Female: Beryllium Copper, Phosphor Bronze, Brass | Gold or Nickel |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber or Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
- These connectors may also be used in applications where keying is a necessity. The RP BNCs meet the same high quality requirements as S-Conn’s standard BNCs. They offer excellent performance DC~ 4GHz.
- Spread Spectrum Wireless Devices





