• About SSMA Series

SSMA utilizes a # 10-36 threaded coupling and is essentially a scaled-down version of the SMA. They are characterized by compactness, high frequency bandwidth, and highly reliable mechanical performance.

The male contact was designed to be the same size as the cable conductor so that it could be used as the mating pin for optimized VSWR.

Impedance:50Ω
Frequency Range:0 to 40 GHz
Voltage Rating:≥500 V rms (depending on cable)
Insulation Resistance:≥1 GΩ
Dielectric Withstanding Voltage:750 V rms
Contact Resistance:Center Contact  ≤5 mΩ、Outer Contact ≤2.5 mΩ
VSWR:≤1.2 + .03f (GHz)

Mating: 190-36 UNS Screw-on Coupling
Connector Durability: ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque:7.1 lbs ~ 9.7 lbs
Coupling Nut Retention Force:≥60.7 lbs
Cable Retention Force:≥ 7.3 lbs (for RG178)、≥ 12.1 lbs (for RG316)、≥ 28.7 lbs (for RG58)

Temperature Range:-65° C to 165° C
Corrosion (Salt Spray):MIL-STD-202, Method 101, Cond. B
Thermal Shock:MIL-STD-202, Method 107, Cond. B
Mechanical:MIL-STD-202, Method 213, Cond. I
Vibration:MIL-STD-202, Method 204, Cond. D

Parts Name Material Plating
Body Stainless steel
Brass
Passivated or Gold
Nickel or Gold
Inner Contact Male: Brass
Female: Beryllium Copper
Phosphor Bronze
Gold
Insulator PTFE None
Gasket Silicone Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

  • Ideal for limited space.
  • High frequency bandwidth.
  • Threaded coupling (more reliable).
  • Radar
  • Military & Aerospace
  • Instrumentation
  • Test and measurement
  • Satellite Communication
View All Products